 |
 |
 |
 |
The
Audiomagus PowerCenter™ SLA Battery Power Supply is
the first in
our family of integrated 12VDC power products. We have done everything we can to ensure the purest, quietest 12VDC power for
your audio components.
Housed in elegant, but unobtrusive, low-profile black anodized
aluminum the
PowerCenter will easily find a home on your audio shelves. Designed for easy and safe battery access, the UL and CE certified 3-stage charger and the AC entry are fully enclosed 24 gauge anti-corrosion treated and painted sheet metal.
- The
PowerCenter Battery Unit is hand-wired and uses high-quality
Tighter and deeper bass, clearer midrange,
smoother and
more extended highs, more unforced detail, quieter backgrounds, and a
more 3-D soundstage... Wow!
connectors, WBT 4% Silver
Solder, and the shortest possible runs of 18 gauge, silver
plated copper premium wire.
- The UL
& CE certified 3-stage charger will easily charge batteries up
to 8AH in
less than 8 hours. Red and green LEDs
indicate state of charge. (Red for charging and green for charged or
idle.)
- With
an eye to ease of use and an ear to ensuring the very best
sound, switches are front-panel-mounted and use solid silver-plated
copper contacts
- The PowerCenter is designed for maximum in DC separation from noisy AC mains power. One switch controls the AC
connection to the charger, while the other switch toggles between
charger and amp. You can never connect the
amplifier to the battery when the charger is connected! For an
extra measure of isolation you can use the second switch to disconnect
from AC power.
- Each
PowerCenter includes an 8AH SLA battery. If
fits the case nicely and provides over 20 hours of musical pleasure.
(If you have a local battery source, we also offer the PowerCenter
without battery so you can save on
shipping.)
Size: L 8.75 inches x W 6.5 inches x H 3.10 inches (L 233mm x W 157mm x H 79mm)
PowerCenter Cable
One
400mm 12VDC
PowerCenter Cable
cord is included. Cord
terminations are plated copper alloy. Power cables are made
of two lengths of stranded 18 AWG OFC silver plated wire in a PET
carbon black braid. They deliver noticeably cleaner and
clearer sound.
- Silver plated OFC (Oxygen Free Copper) wire
- Wire Size: 18 AWG 0.96 mm˛, 0.0015 in˛,
19 x 30 AWG stranded
- Cross-linked ETFE Polymer insulation
- 2.5mm locking plug for connection to
Supply
- 2.1mm non-locking connector for connection to
Component
- All connections use WBT 4% Silver Solder
- High-Quality Plugs
- Contact Resistance: .01
Ω
maximum (initial), .02Ω maximum after humidity, durability exposure
- Dielectric
Withstanding Voltage: 500VAC maximum
- Pin, Spring and Terminals:
Plated copper
alloy
- Mounting,
Bushing and Hex
Nut: Plated copper alloy
- Locking Thread Size:
5/16 - 32 UNEF 2B.
- Contact Rating: 5A 12VDC
Resistive
- Finished in highly durable PET braid in carbon
black

- All parts except battery RoHS Compliant
Battery The
PowerCenter BPS uses a Sealed Lead-Acid (SLA) battery. It
is valve-regulated type (sometimes called
‘sealed’ or maintenance-free) and uses an absorptive
fiberglass mat to hold
the acid electrolyte. The advantage of this design is that the battery
needs no water additions, can be operated in any position, and can be
used in close proximity to people and sensitive equipment.
Charger
Technical Information
| Rated
input voltage |
90-264 VAC, 50/60 Hz |
| Battery
size |
12 volt nominal SLA, VRLA, Gel,
AGM, or flooded |
| Input
Frequency |
50-60 Hz |
| Battery
size |
0.7 AH to 14+ AH |
| Charging
current |
0.7 amps or 700 mA |
| Charger
type |
Lead Acid Chemistry |
| Charging algorithm |
Constant current/constant
voltage/float |
| Stage
1 constant current 750 mA ± 100 mA |
| Stage
2 constant voltage 14.75 volts ± 0.25 volts |
| Stage
3 float charge 13.75 ±0.25 volts |
| "Charged"
light turns on and float charge starts when the charge current is below
0.20 amps ±0.05 amps when the battery charge voltage is
above 14 volts. |
| Output
power |
14W maximum |
| Output
voltage |
14.75 volts maximum |
| Weight |
150 grams, 0.15 kg, 0.33 pounds, 5
oz |
| Cooling |
Natural convection, no fan |
| Efficiency |
>75% |
| Environment |
-10°C to +40°C
operating, -40°C to +70°C storage |
| Temperature
rise |
<40°C rise on case
under any line voltage and maximum rated load |
| Vibration,
Impact |
5mm, 50Hz, 600 Seconds, 1 meter
drop 3 times |
| Protections |
Reverse Polarity, Short circuit
protection |
| Safety |
CE marked, designed to ED60950,
EN55022B |
| MTBF |
30,000 hours by MIL-STD calculation |
| HiPot,
ESD |
Hi-Pot 3000 V, 1 minu7te, ESD 8000V |
| LED Indications |
Power
on, but no battery connected |
Black |
| Charging |
Red |
| Charged/Float
Charging |
Green |
|
|
 |
 |
|
 |
|
 |

|